ColorBox ReAmp
Colorbox Reamp DI
Transparent by design. Built to last.
The Colorbox Reamp DI is a premium mono reamping box designed to send previously recorded line signals back through guitar amplifiers, pedals, and other outboard equipment, allowing the tone to be reshaped after the original performance has been captured.
M.S.R.P.
$189.00
Get it from our distributors
Built around a custom Quagliardi permalloy-core transformer, it provides excellent noise immunity, accurate impedance conversion, and uncompromising signal integrity.
At normal operating levels, the transformer remains exceptionally transparent.
When driven harder, it naturally introduces smooth harmonic content and gently softens transients, adding the musical character that gives the Colorbox its name.
The Colorbox Reamp DI features a 20 dB attenuator, a polarity reverse switch, and a dedicated 12 dB/octave high-pass filter with a cutoff frequency of 73.4 Hz, corresponding to the low D of a guitar in Drop D tuning.
This filter is especially useful when reamping guitars, removing low-frequency rumble and unwanted content below the instrument’s useful range so that amplifiers and speaker cabinets respond with greater clarity and definition.
Its anodized aluminum chassis is built to withstand years of professional use while maintaining the refined industrial design that defines every Quagliardi product.
Each unit comes in a fabric pouch, ideal for transportation and for keeping the enclosure safe from scratches and everyday wear.
Technical Specifications
Connections
Input: ¼-inch unbalanced jack
Outputs: ¼-inch buffered output and balanced XLR output
Gain
Buffered output: 0 dB
Balanced output: +6 dB
Input Impedance
Standard mode: 1 MΩ
CREAM mode: 22 kΩ
Output Impedance
50 Ω
Frequency Response
+0.45 dB at 20 Hz / −1.3 dB at 20 kHz
Total Harmonic Distortion (THD)
0.003% at +4 dBu output, unweighted
0.015% at +26 dBu output, unweighted
Power Requirements
12 V DC, 200 mA
Dimensions
100 × 150 × 80 mm
3.9 × 5.9 × 3.1 in
Weight
200 g
0.44 lb